FV1165 Vertical Machining Center

 

   

Vertical Machining Center - FV1165 - The FV1165 Vertical Machining Center has a large Meehanite cast iron base paired with an extra wide, inverted Y-shaped column. This gives the casting greater tensile strenght and maximum vibration dampening capabilites.
The FV1165 Vertical Machining Center has a large Meehanite cast iron base paired with an extra wide, inverted Y-shaped column. This gives the casting greater tensile strenght and maximum vibration dampening capabilites.

 Table:
  CAT 40  | CAT 50
Table size 51.2 x 25.6 (1,300 x 650)
Table Height 35.4 in (900 mm)
Max load 2,425 lb. (1100 kg)

Travel: 
X 43.3 in (1100 mm)
Y 25.6 in (650 mm)
Z 23.6 in (600 mm)
Spindle nose to table 4.8-28.2 in (125-725 mm)
Spindle center to column 27.4 in (695 mm)

Spindle: 
Spindle speed 15~8,000 RPM / 15 - 6,000 RPM
Spindle motor
Gear Type
CAT 40: 20 / 25 hp (15 / 18.5 kW)
CAT 50: 20 / 25 hp (15 / 18.5 kW)
Spindle taper CAT 40 / CAT 50

Feed rate: 
Rapid Feed Rate 1,181 ipm (30 m/min)
Cutting feed 396 ipm (10 m/min)

Accuracy: 
Repeatability ± 0.00008 in (± 0.002 mm)
Positioning ± 0.0001 in (± 0.003 mm)

Tool Magazine: 
Magazine capacity 32 std / 30 std
Max diameter (with tool in adj. socket) 3.1 / 4.3 in (80/110 mm)
Max diameter (without tool in adj. socket) 5.9 / 7.9 in (150/200 mm)
Max length 9.8 in (250 mm)
Max weight 15.5 ib (7kg)


Other: 
Power 220 v (30 KVA)
Air 87 psi
Machine height 115.8 in (2,940 mm)
Floorspace

CAT 40: 132.7 x 108.7 in
(3,370 x 2,760 mm)
CAT 50: 132.4 x 108.7 in
(3,370 x 2,926 mm)
Weight 15,873 lb. (7,200 kg)

Specifications subject to change.