FA1050S 5-axis

Overview
Specifications
Accuracy
Requirements
  • *IMTS 2016 Featured Machine

  •  

    Pallet Size 41.3" x 41.3" (1,050 mm x 1,050 mm)
    Trunnion Table Index Increment (A axis) .0001 degree (-100° ~ +15°)
    Trunnion Table Index Increment (B axis) .0001 degree
    X axis Travel (work table) 59.1" (1,500 mm)
    Y axis Travel (spindle head) 55.1" (1,400 mm)
    Z axis Travel (column) 45.2" (1,150 mm)
    Maximum Work Load on the Pallet 4,400 lb (2,000 kg)
    Spindle Drive Motor 60 HP (45 kW) for 30 min. / 50 HP (37 kW) cont.
    Spindle Output Torque 963 ft-lb (1,305 Nm)
    Spindle Taper CAT50
    Spindle Speed 6,000 RPM
    Rapid Feedrate (X, Y, Z axes) 590 ipm (15 m/min)
    Tool Storage Capacity 60 Standard (190, 240, 384 Optional)
    Standard Floor Space 284.6" x 317.7" (7,230 mm x 8,070 mm)
    Standard Net Weight 128,750 lbs (58,400 kg)

     

    SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

     

  •  

    Linear Position Accuracy ± .000078" (±0.002 mm) full stroke
    Linear Repeatability ± 0.000039" (± 0.001 mm)
    Rotary Positioning Accuracy (A and B axes) ± 5 arc seconds
    Rotary Positioning Repeatability (A and B axes) ± 3 arc seconds

     

  •  

    Hydraulic Oil Mobil DTE Oil Light (16.6 gal) (63 liter)
    Slideway Lubrication Daphine Multiway 32C 1.5 gal (5.5 liter)
    Spindle Bearing Lubrication Mobil Velocite #3 (9.2 gal) (35 liter)
    A, B Axis Lubrication Mobil Gear 600 XP 68 A axis (10.6 gal/40 liter) B axis (5.3 gal/20 liter)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 71 kVA

     

Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon


×
Difficulty seeing the panoramic? Try viewing it in its own window here.

Heavy-Duty Guideways

Box ways support heavy workloads while retaining rigidity during machining. The FA1050S 5-axis is equipped with box guideways in the X, Y, and Z axes.

Prev | Next

×

Large Work Envelope and Tilt Angle

The FA1050S 5-axis comes fully equipped with the largest work envelope in its class and a wide range tilt angle that can access difficult features.

Prev | Next

×

High-Torque Spindle for Heavy-Duty Cutting

The standard 6,000 RPM spindle is equipped with a double row of cylindrical roller bearings that are located near the taper. The large radial load capacity of these bearings make it possible to withstand heavy-duty loads and strong impacts.

Prev | Next

×

Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:

Table:

I'm also interested in:

 

♦♦♦ Are required fields

×

INDUSTRY NEWS