FH1000SX

Overview
Specifications
Accuracy
Requirements
  • The FH1000SX is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 2,126 ipm (54 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base to suppress vibration in the heaviest of cuts.

  •  

    Pallet Size 39.4" x 31.5" (1,000 mm x 800 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 63.0" (1,600 mm)
    Y-axis Travel (spindle head) 55.1" (1,400 mm)
    Z-axis Travel (work table) 72.8" (1,850 mm)
    Maximum Work Load on the Pallet 6,600 lb (3,000 kg)
    Spindle Drive Motor  40 HP (30 kW) for 30 min. / 30 HP (22 kW) cont.
    Spindle Output Torque 442 ft-lb (600 Nm)
    Spindle Taper CAT50
    Spindle Speed 6,000 RPM
    Spindle Type Direct drive
    Rapid Feedrate (X, Y, and Z axes) 2,126 ipm (54 m/min)
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 369" x 249" x 159" (9,350 mm x 6,305 mm x 4,037 mm)
    Standard Net Weight 66,000 lb (30,000 kg)

     

    SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

     

  •  

    Linear Position Accuracy ± .00012" (±0.003 mm) full stroke
    Linear Repeatability ± 0.00008" (± 0.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds

     

  •  

    Hydraulic Oil Mobil DTE Oil Light (16.6 gal)
    Slideway Lubrication Mobil Vactra #2 (1.5 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (5.3 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (1.1 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm2)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 59 kVA

     

Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon


×
Difficulty seeing the panoramic? Try viewing it in its own window here.

Dual Y- and Z-Axis Ballscrews

These dual ballscrews increase machining stability during heavy-duty cutting.

Prev | Next

×

Shuttle-Style Pallet Changer

This setup gives operators the ability to maneuver around the pallets for easier loading and unloading of the workpiece.

Prev | Next

×

Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:

Table:

I'm also interested in:

 

♦♦♦ Are required fields

×

INDUSTRY NEWS