• The FH630SX-i is a powerful, high-speed horizontal machining center featuring an 8,000 RPM spindle, with the option of a 15,000 RPM high-torque spindle, and a rapid feedrate of 2,362 ipm (60 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity.



    Pallet Size 24.8" x 24.8" (630 mm x 630 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 41.34” (1,050 mm)
    Y-axis Travel (spindle head) 35.43” (900 mm)
    Z-axis Travel (work table) 41.34” (1,050 mm)
    Maximum Work Load on the Pallet 3,310 lb (1,500 kg)
    Spindle Output Torque 744 ft-lb (1,009 Nm)
    Available Spindle (1) CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec)
    Available Spindle (2) CAT#50 50HP 8,000 RPM (High Torque 1009 Nm)
    Available Spindle (3) CAT#50 50HP 15,000 RPM (Wide Range 530 Nm)
    Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121, 200 Optional)
    Standard Floor Space 303" x 142" x 126" (7,695 mm x 3,600 mm x 3,208 mm)
    Standard Net Weight 43,210 lb (19,600 kg)





    Linear Position Accuracy ± .00012" (.003 mm) full stroke
    Linear Repeatability ± .00008" (.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds



    Hydraulic Oil Mobil DTE Oil Light (4.75 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (9.2 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (.8 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 43 kVA



Spindle Cutting Preview

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Laying Low

Toyoda’s column is a unique design that has a low center of gravity. This increased stability assists in providing rigid and precise machining.

Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon

Difficulty seeing the panoramic? Try viewing it in its own window here.

Solidly Constructed

Utilizing JTEKT’s proprietary FCD 600 cast iron technology for the base and column, the solid, high-grade Meehanite cast iron base has three-point support.

Prev | Next


Cutting Rigidity

The dual ballscrews in the Y and Z axes increase machining stability during heavy-duty cutting.

Prev | Next


Center Trough Design

Quickly and cleanly remove chips from your working environment.

Prev | Next


Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:


I'm also interested in:


♦♦♦ Are required fields