Toyoda's Multitasking Horizontal Machining Center is the first in the world to equip a skiving function to a general purpose horizontal type machining center to achieve mass production of gear parts. The GS300H offers improved productivity and flexible machining through high speed cutting and integrated gear part processes of lathe, gear skiving and machining center capabilities. Offering continuous machining on the shop floor, the GS300H ultimately reduces equipment and cutting tools utilized.
X,Y, Z Travel 28.7", 25.6", 33.5", (730 mm, 650 mm, 850 mm) Rapid Feedrate 60 m/min Y-axis Travel (spindle head) 62.99” (1,600 mm) Spindle Nose Shape BT No.40 / BT No.50 Spindle Speed 12,000 / 6,000 min-1 Spindle Drive Motor (short/cont) 22 HP (18.5 kW) / 30 HP (25 kW) B-axis (swivel table indexing angle) 0.001° Rotating Speed (workpiece axis) 3,000 min-1 Rated Output (workpiece axis) 45 HP (38 kW) / 33.5 HP (28.3 kW) Torque max. / cont. (workpiece axis) 118 ft-lb (66 Nm) / 160 ft-lb (90 Nm) Max. Workpiece Diameter 8.66" (220 mm) Max Workpiece Width 5.91" (150 mm) Tool Mass 17.64 lb (8 kg) / 59.52 lb (27 kg) Tool Storage Capacity 40 Standard Floor Space (L x W) 86" x 172" (2,200 mm x 4,375 mm) / 108" x 177" (2,745 mm x 4,510 mm)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
GS300H Multitasking Horizontal Machining Center
Full of Features
Toyoda’s progressive filtration system for coolant through spindle prevents clogging and reduces thermal expansion, while high-quality THK roller guides provide stability without sacrificing speed.
Increase Uptime and Keep Production Moving
Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.
Intuitive Optimization Software
Toyoda's dynamic scheduling software takes the fear out of fully-automated manufacturing. This system plans for efficiency, leading to spindle utilization rates over 90 percent. In dealing with unexpected events that would stop production on competitor's systems, this available software steps in and makes sure the job is done.
Speed and Stability, United
The SX Series comes standard with a 40 HP, 6,000 RPM spindle, and offers an optional 40 HP, 15,000 RMP spindle or 50 HP, high-torque 8,000 RPM spindle for the most rigid of cuts without sacrificing production time.
Rigid & Rotational Accuracy
Synchronous axis motion paired with Toyoda'sGC70 run 11,000 axis positioning calculations per second alongside the Gear Skiving's responsive 5th axis table - resulting in higher quality and module gears.×
Unparalleled Results For The Most Intricate Gears
With its extremely fast skiving technology and control, Toyoda's Multitasking Horizontal Machining Center, developed in-house, produces unparalleled results for gears having internal and external teeth for stringent concentricity requirements.×