The SB316 is fixed rail bridge machine designed for heavy cutting applications. This machine features roller guides, a hydraulic counterbalance system on the headstock, and a powerful spindle. These features allow for highly precise and accurate cuts without sacrificing speed.
The SB316YM model has extended Y-axis travel with five-face machining capabilities to allow for the machining of complex workpieces. This machine features automatic tool changes in the vertical and horizontal orientations and offers automatic clamping of the headstock. Headstock options include 30 degree, 90 degree, extension, and manual universal.
| Table Size | 118" x 59" (3,000 mm x 1,500 mm) |
| X-Axis Travel | 120.5" (3,060 mm) |
| Y-Axis Travel | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 22,000 lb (10,000 kg) |
| Spindle Drive Motor (30 min. / cont.) | 6,000 RPM: 35 HP (26 kW) / 30 HP (22 kW) |
| Spindle Drive Motor (30 min. / cont.) | 5:000 RPM: 40 HP (30 kW) / 35 HP (26 kW) |
| Spindle Output Torque | 6,000 RPM: 461 ft-lb (626.2 Nm) |
| Spindle Output Torque | 5,000 RPM: 1,115 ft-lb (1,512 Nm) |
| Spindle Speed | Gearbox (CAT50): 6,000 RPM |
| Spindle Speed | Gearbox (CAT50): 5,000 RPM |
| Rapid Feedrate (X axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Y axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Z axis) | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Tool Storage Capacity | 32 Standard (60, 90, 120 Optional) |
| Standard Floor Space | 327" x 183" x 171" (8,300 mm x 4,650 mm x 4,350 mm) |
| Standard Net Weight | 59,500 lb (27,000 kg) |
| Table Size | 118" x 59" (3,000 mm x 1,500 mm) |
| X-Axis Travel | 120.5" (3,060 mm) |
| Y-Axis Travel | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 22,000 lb (10,000 kg) |
| Spindle Drive Motor (30 min. / cont.) | 10,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Drive Motor (30 min. / cont.) | 12,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Drive Motor (30 min. / cont.) | 20,000 RPM: 50 HP (37 kW) / 35 HP (26 kW) |
| Spindle Output Torque | 10,000 RPM: 258 ft-lb (350 Nm) |
| Spindle Output Torque | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Output Torque | 20,000 RPM: 86 ft-lb (117 Nm) |
| Spindle Speed | Direct Drive (CAT50): 10,000 RPM |
| Spindle Speed | Integral Motor (CAT50): 12,000 RPM |
| Spindle Speed | Integral Motor (HSK63): 20,000 RPM |
| Rapid Feedrate (X axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Y axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Z axis) | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Tool Storage Capacity | 32 Standard (60, 90, 120 Optional) |
| Standard Floor Space | 327" x 183" x 171" (8,300 mm x 4,650 mm x 4,350 mm) |
| Standard Net Weight | 59,500 lb (27,000 kg) |
| Table Size | 118" x 59" (3,000 mm x 1,500 mm) |
| X-Axis Travel | 120.5" (3,060 mm) |
| Y-Axis Travel | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 22,000 lb (10,000 kg) |
| Spindle Drive Motor (30 min. / cont.) | 6,000 RPM: 35 HP (26 kW) / 30 HP (22 kW) |
| Spindle Drive Motor (30 min. / cont.) | 12,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Output Torque | 6,000 RPM: 388 ft-lb (526 Nm) |
| Spindle Output Torque | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Speed | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Speed | Integral Motor (CAT50): 12,000 RPM |
| Rapid Feedrate (X axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Y axis) | 945 ipm (24 m/min) |
| Rapid Feedrate (Z axis) | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Tool Storage Capacity | 32 Standard (60, 90, 120 Optional) |
| Standard Floor Space | 327" x 183" x 171" (8,300 mm x 4,650 mm x 4,350 mm) |
| Standard Net Weight | 59,500 lb (27,000 kg) |
| Linear Position Accuracy | ± 0.0004" (0.01 mm) full travel |
| Linear Repeatability | ± 0.0001" (0.003 mm) |
| Coolant Tank Capacity | 132 gallon |
| Air Source | 90 psi @ 3.78 CFM |
| Total power Required | AC 220V ±10% (60 kVA) |
Specifications subject to change without notice.
CASE STUDIES
Read: Rigidity, Reliability of Machines Aid In-House Production
“The first is dependability,” explains Bob Standridge, owner of Standridge Color Corporation on their Toyoda bridge mills. “Their uptime is better. The second factor is dimensional stability. It might take three cuts on another machine to remove the same amount of metal as one cut on a Toyoda.”
Read: Toyoda Provides End-To-End Solutions for AMD&E
Many of the machines Accelerated Machine Design & Engineering produces consist of large components such as bases, frames, and slides that require precision on all faces. "These machines have helped us make better products overall," said Mark Tingley, president of AMD&E.
Read: Revolutionizing Oil Disaster Response
Natural Science was determined to develop a better approach to oil spill recovery and needed an electromagnetic boom (e-boom) thus introducing a new concept and application. That's where AMD&E comes in with Toyoda machines as a solution.
Taking a Chance on Toyoda Pays Off
“Toyoda has been an invaluable partner in growing our machining division. They really get to know your business to make sure you are getting exactly what you need to be successful,” said Adam Jaeger, Lead of the CNC Division at Carlson Tool & Manufacturing. Communication and support was a big factor in Carlson’s choice to move forward with Toyoda.
BLOG
Expanding Services, Decreasing Production Times
Building a Toyoda fleet has increased the work envelope available and boosted Carlson Tool's business by expanding its range of services. Carlson Tool is fully confident in its capacity to tackle large and difficult jobs.
Toyoda Helps AMD&E Reduce Lead Times, Increase Productivity
Accelerated Machine Design & Engineering saw an opportunity to improve large component quality by bringing machining in house. To address the need for higher SFM requirements, AMD&E found the perfect match in the SB bridge machine and Stealth vertical machining center.
4 Secrets Behind Surface Finish Optimization on Toyoda's Vertical Bridge Machines
Behind all the covers, flexible machining of large workpieces is achieved through four software features that make your Toyoda bridge machine one of the most powerful tools on your floor.
Job Shop FANUC Oi Double Column Bridge Mill
X-Axis: 79.5" (2,020mm) to 158.2" (4,020mm)
Y-Axis: 59" (1,500mm) to 78.7" (2,000mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6,000 RPM Geared Head
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 120.5" (3,060mm)
Y-Axis: 47.2" (1,200mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6K Geared or Highspeed Options
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 159.8" (4,060mm)
Y-Axis: 63" (1,600mm) to 90.5" (2,300mm)
Z-Axis: 31.5" (800mm) to 39.3" (1000mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
Fanuc 0iM 5” Bar (130mm), Boring Type Machining Center
X-Axis: 78.7" (2,000mm) to 118.1" (3,000mm)
Y-Axis: 70.9" (1,800mm) to 82.6" (2,100mm)
Z-Axis: 51.2" (1,300mm) to 59.1" (1,500mm)
W-Axis: 19.7" (500mm) to 27.5" (700mm)
Up to 20,000 kg (44,000 lbs) Part Weight Capacity
