Rediscover Toyoda's J Series of HMC
Discover how our FH-J series continue to be the industry's choice for high-speed machining in highly productive environments.
The FH400J is a compact, high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).
Toyoda Advantage ROI Justification MACHINE SELECTORPallet Size | 15.75" x 15.75" (400 mm x 400 mm) |
Table Index | Full NC table (360,000 positions) |
X-Axis Travel | 23.62” (600 mm) |
Y-Axis Travel | 22.05” (560 mm) |
Z-Axis Travel | 24.80” (630 mm) |
Max Workpiece Swing | 24.80” (630 mm) |
Max Workpiece Height | 35.43" (900 mm) |
Maximum Work Load on the Pallet | 880 lb (400 kg) |
Spindle Output Torque | 123 ft-lb (167 Nm) |
Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 60 Standard (119 Optional) |
Standard Floor Space | 83" x 166" (2,100 mm x 4,205 mm) |
Machine Height | 108" (27,735 mm) |
Standard Net Weight | 24,200 lb (11,000 kg) |
Pallet Size | 15.75" x 15.75" (400 mm x 400 mm) |
Table Index | Full NC table (360,000 positions) |
X-Axis Travel | 23.62” (600 mm) |
Y-Axis Travel | 22.05” (560 mm) |
Z-Axis Travel | 24.80” (630 mm) |
Max Workpiece Swing | 24.80” (630 mm) |
Max Workpiece Height | 35.43" (900 mm) |
Maximum Work Load on the Pallet | 880 lb (400 kg) |
Spindle Output Torque | 123 ft-lb (167 Nm) |
Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 60 Standard (119 Optional) |
Standard Floor Space | 83" x 166" (2,100 mm x 4,205 mm) |
Machine Height | 108" (27,735 mm) |
Pallet Size | 15.75" x 15.75" (400 mm x 400 mm) |
Table Index | Full NC table (360,000 positions) |
X-Axis Travel | 23.62” (600 mm) |
Y-Axis Travel | 22.05” (560 mm) |
Z-Axis Travel | 24.80” (630 mm) |
Max Workpiece Swing | 24.80” (630 mm) |
Max Workpiece Height | 35.43" (900 mm) |
Maximum Work Load on the Pallet | 880 lb (400 kg) |
Spindle Output Torque | 123 ft-lb (167 Nm) |
Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 60 Standard (119 Optional) |
Standard Floor Space | 83" x 166" (2,100 mm x 4,205 mm) |
Machine Height | 108" (27,735 mm) |
Standard Net Weight | 24,200 lb (11,000 kg) |
Linear Position Accuracy | ± .00012" (.003 mm) full stroke |
Linear Repeatability | ± .00006" (.0015 mm) |
Rotary Table Index Accuracy | ± 7 arc seconds |
Rotary Table Index Repeatability | ± 3.5 arc seconds |
Hydraulic Oil | Mobil DTE Oil Light (4.75 gal) |
Slideway Lubrication | Mobil Vactra #2 (.76 gal) |
Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) |
Spindle Cooling | Mobil Velocite #3 (4 gal) |
Table Lubrication | Mobil Gear 600 XP 150 (.4 gal) |
Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) |
Power Capacity (Machine Wired: 208V - Transformer Not Included) | 52 kVA |
Specifications are subject to change without notice.
CASE STUDIES
Increased Efficiency with Toyoda Leads to New High-Volume Projects
Pre-Toyoda, Scenic Industries started the project with several old mills they had in-house—but transferred the workload over to Toyoda FH500J after installation. With the new machine, they were able to increase production by 35%, increasing output from 65 parts per day to 100. Labor costs were reduced by 50%, lowering labor hours per part from 25 minutes to just eight.
Affordability of FH400J Helps American-Made Company Increase Production
“We bought our first horizontal machine from Toyoda at IMTS in 1998. It has been a workhorse for us and more than ten years later, it’s still working great.”– Andy Wickstrom, general manager of Henry Wisconsin
Scenic Industries Increases Production by 30% with Toyoda
When met with a demand for several high-volume machining projects, Scenic Industries knew they needed a higher-capacity machine. They decided that a Toyoda FH500J horizontal machining center with a pallet changer was worth the investment.
Full Five-Axis Horizontal Machining Centers
Trunnion or Articulating Head
Pallet Range
24.8" (630 mm) to 49.2" (1,250 mm)
Pallet Range
15.7" sq. (400mm) to 17.7" sq. (450mm)
880 lb (400 kg) Capacity
Ø24.80" x 29.53" (Ø630 mm x 750 mm) to
Ø24.80" x 35.43" (Ø630 mm x 900 mm)
Pallet Range
19.68" sq. (500mm) to 21.65" sq. (550mm)
1,760 lb (800 kg)
Ø31.50" x 39.37" (Ø800 mm x 1,000 mm) to
Ø33.46" x 39.37" (Ø850 mm x 1,000 mm)
Pallet Range
24.8" sq. (630mm)
3,310 lb (1,500 kg)
Ø46.06" x 49.21" (Ø1,170 mm x 1,250 mm)
Pallet Range
31.5" sq (800mm)
5,500 lb (2,500 kg)
Ø39.4" x 25.6" (Ø1,000 mm x 650 mm) to
Ø63" x 51.2" (Ø1,600 mm x 1,300 mm)
Pallet Range
39.4" sq. (1000mm) to 41.3" (1050mm)
6,600 lb (3,000 kg)
Ø70.9" x 63" (Ø1,800 mm x 1,600 mm) to
Ø72.8" x 61" (Ø1,850 mm x 1,550 mm)
Pallet Range
49.2" sq. (1,250mm)
11,000 lb (5,000 kg)
Ø94.5" x 70.9" (Ø2,400 mm x 1,800 mm)
Pallet Range
63" x 49.2" (1,600 mm x 1,250 mm)
17,600 lb (8,000 kg) (Opt. 32,000 lb)
Ø126" x 83" (Ø3,200 mm x 2,100 mm)