The FH500J and FH500J-50 are compact, high-speed horizontal machining centers featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).
All FH500J models (#40 & #50) taper are equipped with a Direct Drive B Axis Table, featuring an index time (90 degrees) of 0.5 seconds and 360,000 degree positioning.
Toyoda Advantage ROI Justification MACHINE SELECTOR
| Pallet Size | 19.68" x 19.68" (500 mm x 500 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 28.74” (730 mm) |
| Y-Axis Travel | 28.74” (730 mm) |
| Z-Axis Travel | 33.46” (850 mm) |
| Max Workpiece Swing | 31.50” (800 mm) |
| Max Workpiece Height | 39.37" (1,000 mm) |
| Maximum Work Load on the Pallet | 1,540 lb (700 kg) |
| Spindle Output Torque | 295 ft-lb (400 Nm) |
| Available Spindle | CAT#50 50HP 15,000 RPM (High Torque 303 Nm) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 91.73" x 182.28" (2,330 mm x 4,630 mm) |
| Machine Height | 113" (2,870 mm) |
| Standard Net Weight | 29,700 lb (13,500 kg) |
| Pallet Size | 19.68" x 19.68" (500 mm x 500 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 28.74” (730 mm) |
| Y-Axis Travel | 28.74” (730 mm) |
| Z-Axis Travel | 33.46” (850 mm) |
| Max Workpiece Swing | 31.50” (800 mm) |
| Max Workpiece Height | 39.37" (1,000 mm) |
| Maximum Work Load on the Pallet | 1,540 lb (700 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT#40 30HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Available Spindle | CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 91.73" x 182.28" (2,330 mm x 4,630 mm) |
| Machine Height | 113" (2,870 mm) |
| Standard Net Weight | 29,700 lb (13,500 kg) |
| Pallet Size | 19.68" x 19.68" (500 mm x 500 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 28.74” (730 mm) |
| Y-Axis Travel | 28.74” (730 mm) |
| Z-Axis Travel | 33.46” (850 mm) |
| Max Workpiece Swing | 31.50” (800 mm) |
| Max Workpiece Height | 39.37" (1,000 mm) |
| Maximum Work Load on the Pallet | 1,540 lb (700 kg) |
| Spindle Output Torque | 295 ft-lb (400 Nm) |
| Available Spindle | CAT#50 50HP 15,000 RPM (High Torque 303 Nm) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 91.73" x 182.28" (2,330 mm x 4,630 mm) |
| Machine Height | 113" (2,870 mm) |
| Standard Net Weight | 29,700 lb (13,500 kg) |
| Linear Position Accuracy | ± .00012" (.003 mm) full stroke |
| Linear Repeatability | ± .00008" (.002 mm) |
| Rotary Table Index Accuracy | ± 7 arc seconds |
| Rotary Table Index Repeatability | ± 3.5 arc seconds |
| Hydraulic Oil | Mobil DTE Oil Light (4.75 gal) |
| Slideway Lubrication | Mobil Vactra #2 (1.1 gal) |
| Spindle Bearing Lubrication | Mobil Velocite #6 (1.1 gal) |
| Spindle Cooling | Mobil Velocite #3 (5.3 gal) |
| Table Lubrication | Mobil Gear 600 XP 150 (.79 gal) |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) |
| Power Capacity (Machine Wired: 208V - Transformer Not Included) | 51 kVA |
Specifications are subject to change without notice.
Arch Global uses the FH500J Horizontal Machining Center to excel in Aerospace and Defense.
Toyoda’s J Series continues to be the industry’s choice for high-speed machining in highly productive environments.
Learn more about how multiple FH500J horizontal machining centers paired with a fleet of custom robot cells benefited Stecker Machine Co.
Designed for speed, the FH500J horizontal machining center was at IMTS 2018.
All FH500J Horizontal Machining Center models (#40 & #50) taper are now equip with a Direct Drive B Axis Table.
4140 steel slot milling on Toyoda FH500J horizontal machining center running at 3,000 RPM and 13 ipm at a full 1.5 inches depth.
Pocketing demo on Toyoda FH500J horizontal machining center. Cutting on a 4140 steel at 3,800 RPM and 90 ipm.
At IMTS 2014, the FH500J had an aluminum demo, where visitors were able to walk away with manufactured dice.
Pallet Range
15.7" sq. (400mm) to 17.7" sq. (450mm)
880 lb (400 kg) Capacity
Ø24.80" x 29.53" (Ø630 mm x 750 mm) to
Ø24.80" x 35.43" (Ø630 mm x 900 mm)
Pallet Range
19.68" sq. (500mm) to 21.65" sq. (550mm)
1,760 lb (800 kg)
Ø31.50" x 39.37" (Ø800 mm x 1,000 mm) to
Ø33.46" x 39.37" (Ø850 mm x 1,000 mm)
Pallet Range
24.8" sq. (630mm)
3,310 lb (1,500 kg)
Ø46.06" x 49.21" (Ø1,170 mm x 1,250 mm)
Pallet Range
31.5" sq (800mm)
5,500 lb (2,500 kg)
Ø39.4" x 25.6" (Ø1,000 mm x 650 mm) to
Ø63" x 51.2" (Ø1,600 mm x 1,300 mm)
Pallet Range
39.4" sq. (1000mm) to 41.3" (1050mm)
6,600 lb (3,000 kg)
Ø70.9" x 63" (Ø1,800 mm x 1,600 mm) to
Ø72.8" x 61" (Ø1,850 mm x 1,550 mm)
Pallet Range
49.2" sq. (1,250mm)
11,000 lb (5,000 kg)
Ø94.5" x 70.9" (Ø2,400 mm x 1,800 mm)
Pallet Range
63" x 49.2" (1,600 mm x 1,250 mm)
17,600 lb (8,000 kg) (Opt. 32,000 lb)
Ø126" x 83" (Ø3,200 mm x 2,100 mm)
