The NEX-110 high torque gearbox spindle is well suited for tough materials, and has optional C and Y axis capabilities.
NEX-110
Standard turning center
19.4" (495 mm) Max Swing
15.7" (400 mm) Max Turning Diameter
25.8" (657 mm) Max Turning Length
NEX-110M
Turning center will milling capabilities
22" (560 mm) Max Swing
13.8" (350 mm) Max Turning Diameter
24.8" (629.8 mm) Max Turning Length
NEX-110Y
Turning center with milling and Y-axis
22" (560 mm) Max Swing
13.8" (350 mm) Max Turning Diameter
25" (635 mm) Max Turning Length
| Max Workpiece Swing | 19.4" (495 mm) |
| Max Turning Diameter | 15.7" (400 mm) |
| Max Turning Length | 25.8" (657 mm) |
| Max Bar Work Capacity | 3" (77 mm) |
| X-Axis Travel | 8.7" (220 mm) |
| Z-Axis Travel | 28" (710 mm) |
| Spindle Nose | A2-8 |
| Spindle Speed | 3,500 RPM |
| Spindle Drive Motor (30 min. / cont.) | 25 HP (18.5 kW) for 30 min. / 20 HP (15 kW) cont. |
| Chuck Size | 10" (254 mm) |
| Max Through Hole Diameter | 3.5" (86 mm) |
| Max Workpiece Swing | 19.4" (495 mm) |
| Max Turning Diameter | 15.7" (400 mm) |
| Max Turning Length | 25.8" (657 mm) |
| Max Bar Work Capacity | 3" (77 mm) |
| X-Axis Travel | 8.7" (220 mm) |
| Z-Axis Travel | 28" (710 mm) |
| Spindle Nose | A2-8 |
| Spindle Speed | 3,500 RPM |
| Spindle Drive Motor (30 min. / cont.) | 25 HP (18.5 kW) for 30 min. / 20 HP (15 kW) cont. |
| Chuck Size | 10" (254 mm) |
| Max Through Hole Diameter | 3.5" (86 mm) |
| Max Workpiece Swing | 19.4" (495 mm) |
| Max Turning Diameter | 15.7" (400 mm) |
| Max Turning Length | 25.8" (657 mm) |
| Max Bar Work Capacity | 3" (77 mm) |
| X-Axis Travel | 8.7" (220 mm) |
| Z-Axis Travel | 28" (710 mm) |
| Spindle Nose | A2-8 |
| Spindle Speed | 3,500 RPM |
| Spindle Drive Motor (30 min. / cont.) | 25 HP (18.5 kW) for 30 min. / 20 HP (15 kW) cont. |
| Chuck Size | 10" (254 mm) |
| Max Through Hole Diameter | 3.5" (86 mm) |
Specifications are subject to change without notice.
Read: Puritas Metal Products Counts on Toyoda to Deliver High-Quality Products for US Military Cargo and Transport
Puritas Metal Products has earned its place as the leading manufacturer of high-quality lifting rings and plate nuts. "All in all, we are very pleased with the purchase of these machines. With the cost of manufacturing rising from materials, healthcare, and labor, we are still able to sustain low costs for our customers because of our investment in high-performance machinery," said Todd Whitney, Puritas General Manager.
BLOG
Puritas Metal Products Increase Production 37% with Toyoda
After installation, the NEX-105 has given Puritas greater capacity and the ability to put stock parts on the shelf. The NEX-108M increased efficiencies all around and eliminated the need for two other machines.
Built for high-speed production of small complex components, watch as the NEX-105 makes spinning tops with fast rapid traverse rates.
Horizontal Boxway Lathes
Chuck Sizes: 10"
Bar Capacity: 3.18"
Turning Diameter: 10" to 11.8"
Turning Length: 27.5" to 28.8"
Variants: Y-Axis, Milling
Direct Drive Spindles, Optional Sub Spindle
Chuck Size: 8" (203 mm)
Bar Capacity: 2.55" (65 mm)
Turning Diameter: 15.35" (390 mm)
Turning Length: 20.10" (510.5 mm)
Horizontal Boxway Lathes
Chuck Sizes: 8" to 18"
Bar Capacity: 2" to 5.9"
Turning Diameter: 9.8" to 21.6"
Turning Length: 11.2" to 88.2"
Variants: Y-Axis, Subspindle, Milling, Long bed
Horizontal Boxway Lathes
Chuck Sizes: 8" to 18"
Bar Capacity: 2" to 5.9"
Turning Diameter: 9.8" to 21.6"
Turning Length: 11.2" to 88.2"
Variants: Y-Axis, Subspindle, Milling, Long bed
Horizontal Linear Way Lathes
8" (203 mm) Chuck
12.6" (320 mm) Max Turning Diameter
18.89" (480 mm) Max Swing
Horizontal Linear Way Lathes
Chuck Sizes: 6" to 10"
Bar Capacity: 1.7" to 3"
Turning Diameter: 9.4" to 13.8"
Turning Length: 13.8" to 25.8"
Variants: Y-Axis, Milling
Large, Superduty Boxway Lathes
Chuck Sizes: 12" to 32"
Bar Capacity: 3.5" to 10"
Turning Diameter: 23.6" to 35.4"
Turning Length: 36.8" to 175.7"
Variants: HP, Y-Axis, Milling, Long Bed
Large, Superduty Boxway Lathes
Chuck Sizes: 12" to 32"
Bar Capacity: 3.5" to 10"
Turning Diameter: 23.6" to 35.4"
Turning Length: 36.8" to 175.7"
Variants: HP, Y-Axis, Milling, Long Bed
Opposing Twin Spindle, Twin Turret Lathes
Chuck Sizes: 6" to 8"
Bar Capacity: 1.65" to 2.5"
Turning Diameter: 10.2 to 11.8"
Turning Length: 20.1" to 25.9"
Mirrored Twin Spindle, Twin Turret Lathes
Chuck Sizes: 8"
Bar Capacity: 2" to 2.6"
Turning Diameter: 12.2"
Turning Length: 9.84"
Variants: Y-axis, Milling
Vertical Turning Centers, L or R Configurations
Table Sizes: 13.8" to 43.3"
Turning Diameter: 14" to 47.2"
Turning Height: 15" to 39.4"
Live Milling Available
Hydrostatic Table, Live Tooled W-Axis Verticals
Table Sizes: 63" to 98.4"
Turning Swing: 78.7" to 118.1"
Turning Height: 47.2" to 98.4"
Programmable W-Axis
Right Angle Head Attachment Optional
