Toyoda | AQ1665

Vertical Machining Centers

High speed, high performance, and high load capacities to lower your cost per part.

AQ1665

The AQ1665 is a high-speed vertical machining center featuring cylindrical roller guides, a Meehanite cast iron base, and a high-performance spindle. This machine maximizes cutting performance with rigid cuts and a powerful spindle.

Toyoda Advantage ROI Justification MACHINE SELECTOR

FERROUS SPECS

Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

NON-FERROUS SPECS

Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

HIGH TEMP ALLOY SPECS

Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

ACCURACY

Linear Position Accuracy± 0.0002" (0.005 mm) full travel
Linear Repeatability ± 0.00012" (0.003 mm)

REEQUIREMENTS

Coolant Tank Capacity270 gallon
Air Source100 psi
Total power Required3 phase 220V ±10% (35 kVA)
Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 68.9" x 25.6" (1,750 mm x 650 mm)
X-Axis Travel 63" (1,600 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 24" (610 mm)
Distance from Spindle Nose to Table Top 5.9" to 29.9" (150 mm to 760 mm)
Maximum Table Load 2,205 lb (1,000 kg)
Spindle Drive Motor (30 min. / cont.) 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque 92 ft-lb (125 Nm)
Spindle Speed Direct Drive (CAT40): 15,000 RPM
Rapid Feedrate (X axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Y axis) 1,417 ipm (36 m/min)
Rapid Feedrate (Z axis) 1,181 ipm (30 m/min)
Maximum Cutting Feedrate 1,181 ipm (30 m/min)
Tool Storage Capacity 40 Standard
Standard Floor Space 216" x 95.4" x 119" (5,470 mm x 2,420 mm x 3,020 mm)
Machine Weight 16,975 lb (7,700 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Linear Position Accuracy± 0.0002" (0.005 mm) full travel
Linear Repeatability ± 0.00012" (0.003 mm)
Coolant Tank Capacity270 gallon
Air Source100 psi
Total power Required3 phase 220V ±10% (35 kVA)

Specifications are subject to change without notice.

Full Line of Vertical Machining Centers

Five-Axis

Full Five-Axis Vertical Machining Centers
Trunnion or Articulating Head

View Models

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

STEALTH-65 Series

Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

FV-S Die/Mold

Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models

AQ Series

Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

High Speed Production Line

Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)

View Models

High Speed Production Line

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)

View Models

Twin Spindle

Twin Spindle Vertical Machining Center

View Models

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models