Toyoda | UA2090Ti

Vertical Machining Centers

High speed, high performance, and high load capacities to lower your cost per part.

UA2090Ti

Using a tilting head for five-axis machining, the UA2090 Ti is high-performance vertical machining center designed for large part machining of Titanium and Hard Alloy components. An oil-recirculating heat exchange keeps the spindle temperature constant to ensure minimal thermal spindle expansion, and the unique counterbalance system on the headstock makes for smoother operation and long-term accuracy.

Toyoda Advantage ROI Justification MACHINE SELECTOR

FERROUS SPECS

Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

NON-FERROUS SPECS

Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

HIGH TEMP ALLOY SPECS

Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

ACCURACY

REEQUIREMENTS

Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Clamping Area 84.6" x 35.4" (2,150 mm x 900 mm)
X-Axis Travel 78.7"(2,000 mm)
Y-Axis Travel 35.4"(900 mm)
Z-Axis Travel 27.5" (700 mm)
Distance Between Table and Spindle Nose in Vertical Position 3.1" to 30.7" (80 mm to 780 mm)
A-axis Swiveling Range ± 30°
B-axis Rotating Range(table) ± 30°
Maximum Table Load 4,850 lb (2,200 kg)
Spindle Drive Motor (30 min. / cont.) 30 HP (22 kW) / 35 HP (25 kW)
Spindle Output Torque 811 ft-lb (1,100 Nm)
Spindle Speed Direct Drive (Big Plus #50): 8,000 RPM
Tool Storage Capacity 30 (40 Optional)
Standard Floor Space 209" x 130" x 157" (5,300 mm x 3,300 mm x 3,990 mm)
Machine Weight 50,706 lb (23,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

Specifications are subject to change without notice.

Full Line of Vertical Machining Centers

Five-Axis

Full Five-Axis Vertical Machining Centers
Trunnion or Articulating Head

View Models

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

STEALTH-65 Series

Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

FV-S Die/Mold

Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models

AQ Series

Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

High Speed Production Line

Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)

View Models

High Speed Production Line

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)

View Models

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models