Toyoda | Vertical Machining Centers

Vertical Machining Centers

High speed, high performance, and high load capacities machining centers to lower your cost per part.

FV1480

The FV1480 is a heavy-duty vertical machining center that features four Y-axis box guideways, a Meehanite cast iron base, and a high-performance spindle.

Toyoda Advantage ROI Justification MACHINE SELECTOR
FV1480 Toyoda Vertical Machining Center
FV1480 Toyoda Vertical Machining Center
FV8090 Vertical Machining Center Cast Iron Body
FV Vertical Machining Center Coolant

FERROUS SPECS

Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

NON-FERROUS SPECS

Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

HIGH TEMP ALLOY SPECS

Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

ACCURACY

REEQUIREMENTS

Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 61" x 31.5" (1,550 mm x 800 mm)
X-Axis Travel 55.1" (1,400 mm)
Y-Axis Travel 31.5" (800 mm)
Z-Axis Travel 27.6" (700 mm)
Maximum Table Load 3,960 lb (1,800 kg)
Distance from Spindle Nose to Table Top 7.9" to 35.4" (200 mm to 900 mm)
Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
Spindle Output Torque 485 ft-lb (658 Nm)
Spindle Speed Gearbox (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
Tool Storage Capacity 40 Standard (60 Optional)
Standard Floor Space 201" x 172" x 132" (5,113 mm x 4,374 mm x 3,342 mm)
Machine Weight 26,455 lb (12,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

Specifications subject to change without notice.

Full Line of Vertical Machining Centers

FV965 Toyoda Vertical Machining Centers

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900 mm) - 59.1" (1.500 mm)
Y-Axis: 25.6" (650 mm)
Z-Axis: 23.6" (600 mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models
FV1480 Toyoda Vertical Machining Center

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400 mm) - 63" (1,600 mm)
Y-Axis: 31.5" (800 mm)
Z-Axis: 27.6" (700mm) - 31.5" (800 mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models
FV2090 Toyoda Vertical Machining Centers

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000 mm)
Y-Axis: 35.4" (900 mm)
Z-Axis: 35.4" (900 mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models
Stealth 965 Toyoda Vertical Machining Center

STEALTH-65 Series

X-Axis: 35.4" (900 mm) - 59.1" (1,500 mm)
Y-Axis: 25.6" (650 mm)
Z-Axis: 23.6" (600 mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

PRO Series

X-Axis Travel: 39.4" (1,000 mm)
Y-Axis Travel: 23.6" (600 mm)
Z-Axis Travel: 23.6" (600 mm)
Spindle: 12,000 RPM

View Models
FV1050S Toyoda Vertical Machining Center

FV-S Die/Mold

X-Axis: 40.2" (1,020 mm) - 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) - 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) - 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models
AQ850 Toyoda Vertical Machining Center

AQ Series

X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models
MCV 450 with pallet changer

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)
Spindle: 12,000 RPM

View Models
GEMINI MAX Twin Spindle Machining Center

Twin Spindle

X-Axis: 19.7" (500 mm) - 29.5" (750 mm)
Y-Axis: 17.7" (450 mm) - 19.6" (500 mm)
Z-Axis: 18.8" (480 mm) - 23.6" (600 mm)

View Models
DTC400XL Drill Tap Machining Center

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models
UB 6022 PCB Machine

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models