Toyoda | Stealth 1365
English Deutsch Portuguese

Vertical Machining Centers

High speed, high performance, and high load capacities to lower your cost per part.

Stealth 1365

The Stealth 1365 is a high-speed vertical machining center that features four Y-axis box guideways, a Meehanite cast iron base, and powerful drive motors on the X, Y and Z axes. Ideal for job shop applications, the Stealth is as efficient as it is accurate.

Toyoda Advantage ROI Justification MACHINE SELECTOR

FERROUS SPECS

Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Gearbox (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Gearbox (CAT50):  6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

NON-FERROUS SPECS

Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Caixa de câmbio (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Caixa de câmbio (CAT50):  6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

HIGH TEMP ALLOY SPECS

Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Gearbox (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Transmissão direta (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Gearbox (CAT50):  6,000 RPM
Spindle Speed Transmissão direta (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

ACCURACY

REEQUIREMENTS

Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Gearbox (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Gearbox (CAT50):  6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Caixa de câmbio (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Caixa de câmbio (CAT50):  6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 57.1" x 25.6" (1,450 mm x 650 mm)
X-Axis Travel 51.2" (1,300 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 2,866 lb (1,300 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Gearbox (CAT40): 282 ft-lb (380 Nm)
Spindle Output Torque Gearbox (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Transmissão direta (CAT40): 92 ft-lb (125 Nm)
Spindle Speed Gearbox (CAT40):  8,000 RPM
Spindle Speed Gearbox (CAT50):  6,000 RPM
Spindle Speed Transmissão direta (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 187" x 118" x 116" (4,738 mm x 2,990 mm x 2,940 mm)
Machine Weight 16,755 lb (7,600 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

Specifications subject to change without notice.

CASE STUDIES

Read: Toyoda Provides End-To-End Solutions for AMD&E
Many of the machines Accelerated Machine Design & Engineering produces consist of large components such as bases, frames, and slides that require precision on all faces. "These machines have helped us make better products overall," said Mark Tingley, president of AMD&E.

Read: Revolutionizing Oil Disaster Response
Natural Science was determined to develop a better approach to oil spill recovery and needed an electromagnetic boom (e-boom) thus introducing a new concept and application. That's where AMD&E comes in with Toyoda machines as a solution.

BLOG

Toyoda Helps AMD&E Reduce Lead Times, Increase Productivity
Accelerated Machine Design & Engineering saw an opportunity to improve large component quality by bringing machining in house. To address the need for higher SFM requirements, AMD&E found the perfect match in the SB bridge machine and Stealth vertical machining center.

Machine Overview of Stealth Series

At IMTS 2014, the Stealth 1165 showcased its cutting capabilities with Caron Engineering's TMAC System for tool monitoring.
Stealth Series Steel Machining

Toyoda's Stealth Series features high-precision box guideways and powerful drive motors. Watch as the Stealth demonstrates its rigidity and speed while machining steel.
STEALTH 1165 Steel Cutting Application

Engineered to precisely maneuver through challenging materials, Toyoda's Stealth Vertical Machining Centers deliver long-lasting accuracy - an evolution in job shop performance.
STEALTH 1165 Stainless Steel 304 Demo

Stainless steel machining demonstration on a Toyoda STEALTH 1165 vertical machining center. The application includes hole boring, roughing, and ramping.
STEALTH 1165 Stainless Steel 420 Mold Cavity Demo

420 Stainless Steel Mold Cavity demonstration on a Toyoda STEALTH 1165 Vertical Machining Center. The application includes hole boring and roughing.

Full Line of Vertical Machining Centers

Five-Axis

Full Five-Axis Vertical Machining Centers
Trunnion or Articulating Head

View Models

Five-Axis

UA2090Ti
78.7" (X) x 35.4" (Y) x 27.5" (Z)

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

FV-65 Series

FV965
35.4" (X) x 25.6" (Y) x 23.6" (Z)

FV1165
43.3" (X) x 25.6" (Y) x 23.6" (Z)

FV1365
51.2" (X) x 25.6" (Y) x 23.6" (Z)

FV1565
59.1" (X) 25.6" (Y) x 23.6" (Z)

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-80 Series

FV1480
55.1" (X) x 31.5" (Y) x 27.6" (Z)

FV1680
63" (X) x 31.5" (Y) x 31.5" (Z)

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-90 Series

FV2090
78.7" (X) x 35.4" (Y) x 35.4" (Z)

STEALTH-65 Series

Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

STEALTH-65 Series

Stealth 965
35.4" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1165
43.3" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1365
51.2" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1565
59.1" (X) x 25.6" (Y) x 23.6" (Z)

FV-S Die/Mold

Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models

FV-S Die/Mold

FV1050S
40.2" (X) x 20.1" (Y) x 20.1" (Z)

FV1265S
47.2" (X) x 25.6" (Y) x 24.0" (Z)

AQ Series

Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

AQ Series

AQ850
31.5" (X) x 20.1" (Y) x 20.1" (Z)

AQ1050
40.2" (X) x 20.1" (Y) x 20.1" (Z)

AQ1265
47.2" (X) x 25.6" (Y) x 24" (Z)

AQ1465
55.1" (X) x 25.6" (Y) x 24" (Z)

AQ1665
63" (X) x 25.6" (Y) x 24" (Z)

High Speed Production Line

Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)

View Models

High Speed Production Line

e640V
23.6" (X) x 19.69" (Y) x 15.75" (Z)

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)

View Models

Integral Pallet Changing Machines

MCV 450XL
High speed and high performance vertical machining center.

Twin Spindle

Twin Spindle Vertical Machining Center

View Models

Twin Spindle

Gemini Max
29.5" (X) x 19.6" (Y) x 23.6" (Z)

Gemini XL
23.6" (X) x 17.7" (Y) x 23.6" (Z)

Gemini XL Jr.
19.7" (X) x 17.7" (Y) x 23.6" (Z)

Gemini Mini
23.6" (X) x 15.7" (Y) x 18.8" (Z)

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models

Drill Tap Centers

DTC-400XL
16.7" (X) x 15.75" (Y) x 12.6" (Z)

DTC-400XL-L
27.5” (X) x 15.7” (Y) x 12.6” (Z)

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models

PCB Drilling Machines

UB-6022D-20
Under the most critical demand for accuracy, efficiency, and drilling on micro holes or thin boards, the needed performance can be easily found on Takisawa's ASTRON UB-6022D-20.