Machine Overview of Stealth Series
At IMTS 2014, the Stealth 1165 showcased its cutting capabilities with Caron Engineering's TMAC System for tool monitoring.
The Stealth 1565 is a high-speed vertical machining center that features four Y-axis box guideways, a Meehanite cast iron base, and powerful drive motors on the X, Y and Z axes. Ideal for job shop applications, the Stealth is as efficient as it is accurate.
Toyoda Advantage ROI Justification MACHINE SELECTORTable Size | 65" x 25.6" (1,650 mm x 650 mm) |
X-Axis Travel | 59.1" (1,500 mm) |
Y-Axis Travel | 25.6" (650 mm) |
Z-Axis Travel | 23.6" (600 mm) |
Maximum Table Load | 3,306 lb (1,500 kg) |
Distance from Spindle Nose to Table Top | 4.9" to 28.5" (125 mm to 725 mm) |
Spindle Drive Motor (30 min. / cont.) | Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW) |
Spindle Drive Motor (30 min. / cont.) | Gearbox (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Drive Motor (30 min. / cont.) | Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Output Torque | Gearbox (CAT40): 282 ft-lb (380 Nm) |
Spindle Output Torque | Gearbox (CAT50): 339 ft-lb (460 Nm) |
Spindle Output Torque | Direct Drive (CAT40): 92 ft-lb (125 Nm) |
Spindle Speed | Gearbox (CAT40): 8,000 RPM |
Spindle Speed | Gearbox (CAT50): 6,000 RPM |
Spindle Speed | Direct Drive (CAT40): 12,000 RPM |
Avanço rápido (eixos X e Y) | 1,181 ipm (30 m/min) |
Rapid Feedrate (Z axis) | 945 ipm (24 m/min) |
Maximum Cutting Feedrate | 945 ipm (24 m/min) |
Tool Storage Capacity | 24 Standard |
Machine Weight | 17,857 lb (8,100 kg) |
Standard Floor Space | 205" x 118" x 116" (5,218 mm x 2,990 mm x 2,940 mm) |
Table Size | 65" x 25.6" (1,650 mm x 650 mm) |
X-Axis Travel | 59.1" (1,500 mm) |
Y-Axis Travel | 25.6" (650 mm) |
Z-Axis Travel | 23.6" (600 mm) |
Maximum Table Load | 3,306 lb (1,500 kg) |
Distance from Spindle Nose to Table Top | 4.9" to 28.5" (125 mm to 725 mm) |
Spindle Drive Motor (30 min. / cont.) | CAT40 (Geared Head): 20 HP (15 kW) / 15 HP (11 kW) |
Spindle Drive Motor (30 min. / cont.) | Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Drive Motor (30 min. / cont.) | CAT40 (Direct Drive): 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Output Torque | Gearbox (CAT40): 282 ft-lb (380 Nm) |
Spindle Output Torque | Caixa de câmbio (CAT50): 339 ft-lb (460 Nm) |
Spindle Output Torque | Direct Drive (CAT40): 92 ft-lb (125 Nm) |
Spindle Speed | Gearbox (CAT40): 8,000 RPM |
Spindle Speed | Gearbox (CAT40): 8,000 RPM |
Spindle Speed | Transmissão direta (CAT40): 12,000 RPM |
Avanço rápido (eixos X e Y) | 1,181 ipm (30 m/min) |
Rapid Feedrate (Z axis) | 945 ipm (24 m/min) |
Maximum Cutting Feedrate | 945 ipm (24 m/min) |
Tool Storage Capacity | 24 Standard |
Machine Weight | 17,857 lb (8,100 kg) |
Standard Floor Space | 205" x 118" x 116" (5,218 mm x 2,990 mm x 2,940 mm) |
Table Size | 65" x 25.6" (1,650 mm x 650 mm) |
X-Axis Travel | 59.1" (1,500 mm) |
Y-Axis Travel | 25.6" (650 mm) |
Z-Axis Travel | 23.6" (600 mm) |
Maximum Table Load | 3,306 lb (1,500 kg) |
Distance from Spindle Nose to Table Top | 4.9" to 28.5" (125 mm to 725 mm) |
Spindle Drive Motor (30 min. / cont.) | CAT40 (Geared Head): 20 HP (15 kW) / 15 HP (11 kW) |
Spindle Drive Motor (30 min. / cont.) | CAT50: 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Drive Motor (30 min. / cont.) | Transmissão Direta (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW) |
Spindle Output Torque | Gearbox (CAT40): 282 ft-lb (380 Nm) |
Spindle Output Torque | Gearbox (CAT50): 339 ft-lb (460 Nm) |
Spindle Output Torque | Transmissão Direta (CAT40): 92 ft-lb (125 Nm) |
Spindle Speed | Gearbox (CAT40): 8,000 RPM |
Spindle Speed | Gearbox (CAT50): 6,000 RPM |
Spindle Speed | Caixa de câmbio 6,000 RPM |
Avanço rápido (eixos X e Y) | 1,181 ipm (30 m/min) |
Rapid Feedrate (Z axis) | 945 ipm (24 m/min) |
Maximum Cutting Feedrate | 945 ipm (24 m/min) |
Tool Storage Capacity | 24 Standard |
Machine Weight | 17,857 lb (8,100 kg) |
Standard Floor Space | 205" x 118" x 116" (5,218 mm x 2,990 mm x 2,940 mm) |
Specifications subject to change without notice.
CASE STUDIES
Read: Toyoda Provides End-To-End Solutions for AMD&E
Many of the machines Accelerated Machine Design & Engineering produces consist of large components such as bases, frames, and slides that require precision on all faces. "These machines have helped us make better products overall," said Mark Tingley, president of AMD&E.
Read: Revolutionizing Oil Disaster Response
Natural Science was determined to develop a better approach to oil spill recovery and needed an electromagnetic boom (e-boom) thus introducing a new concept and application. That's where AMD&E comes in with Toyoda machines as a solution.
BLOG
Toyoda Helps AMD&E Reduce Lead Times, Increase Productivity
Accelerated Machine Design & Engineering saw an opportunity to improve large component quality by bringing machining in house. To address the need for higher SFM requirements, AMD&E found the perfect match in the SB bridge machine and Stealth vertical machining center.
Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM
Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD
Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD
Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM
Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive
Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive
Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)
X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)
The DTC machines are designed for drill tap applications and full milling capabilities.
View ModelsHigh speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.
View Models