Toyoda | Stealth 965

Vertical Machining Centers

High speed, high performance, and high load capacities to lower your cost per part.

Stealth 965

The Stealth 965 is a high-speed vertical machining center that features four Y-axis box guideways, a Meehanite cast iron base, and powerful drive motors on the X, Y and Z axes. Ideal for job shop applications, the Stealth is as efficient as it is accurate.

Toyoda Advantage ROI Justification MACHINE SELECTOR

FERROUS SPECS

Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40) 92 ft-lb (125 Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Tipo de elevação com correia articulada, altura de queda de 47"

NON-FERROUS SPECS

Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Geared Head(CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) /20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92ft-lb (125Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

HIGH TEMP ALLOY SPECS

Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Caixa de câmbio (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 945 ipm (24 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate Direct Drive (CAT40): 12,000 RPM
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

ACCURACY

REEQUIREMENTS

Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40) 92 ft-lb (125 Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Tipo de elevação com correia articulada, altura de queda de 47"
Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Geared Head(CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Caixa de câmbio (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Direct Drive (CAT40): 25 HP (18.5 kW) /20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Direct Drive (CAT40): 92ft-lb (125Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 1,181 ipm (30 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate 945 ipm (24 m/min)
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor
Table Size 43.3" x 25.6" (1,100 mm x 650 mm)
X-Axis Travel 35.4" (900 mm)
Y-Axis Travel 25.6" (650 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,985 lb (900 kg)
Distance from Spindle Nose to Table Top 4.9" to 28.5" (125 mm to 725 mm)
Spindle Drive Motor (30 min. / cont.) Gearbox (CAT40): 20 HP (15 kW) / 15 HP (11 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Drive Motor (30 min. / cont.) Geared Head (CAT50): 25 HP (18.5 kW) / 20 HP (15 kW)
Spindle Output Torque Geared Head (CAT40): 282ft-lb (380Nm)
Spindle Output Torque Caixa de câmbio (CAT50): 339 ft-lb (460 Nm)
Spindle Output Torque Geared Head (CAT50): 339 ft-lb (460 Nm)
Spindle Speed Geared Head (CAT40): 8,000 RPM
Spindle Speed Geared Head (CAT50): 6,000 RPM
Spindle Speed Direct Drive (CAT40): 12,000 RPM
Avanço rápido (eixos X e Y) 945 ipm (24 m/min)
Rapid Feedrate (Z axis) 945 ipm (24 m/min)
Maximum Cutting Feedrate Direct Drive (CAT40): 12,000 RPM
Tool Storage Capacity 24 Standard
Standard Floor Space 159" x 118" x 116" (4,048 mm x 2,990 mm x 2,940 mm)
Machine Weight 15,432 lb (7,000 kg)
Chip Conveyor Hinged Belt Lift Up type, 47" Drop Height from floor

Specifications subject to change without notice.

CASE STUDIES

Read: Toyoda Provides End-To-End Solutions for AMD&E
Many of the machines Accelerated Machine Design & Engineering produces consist of large components such as bases, frames, and slides that require precision on all faces. "These machines have helped us make better products overall," said Mark Tingley, president of AMD&E.

Read: Revolutionizing Oil Disaster Response
Natural Science was determined to develop a better approach to oil spill recovery and needed an electromagnetic boom (e-boom) thus introducing a new concept and application. That's where AMD&E comes in with Toyoda machines as a solution.

BLOG

Toyoda Helps AMD&E Reduce Lead Times, Increase Productivity
Accelerated Machine Design & Engineering saw an opportunity to improve large component quality by bringing machining in house. To address the need for higher SFM requirements, AMD&E found the perfect match in the SB bridge machine and Stealth vertical machining center.

Full Line of Vertical Machining Centers

Five-Axis

Full Five-Axis Vertical Machining Centers
Trunnion or Articulating Head

View Models

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

STEALTH-65 Series

Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

FV-S Die/Mold

Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models

AQ Series

Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

High Speed Production Line

Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)

View Models

High Speed Production Line

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)

View Models

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models