The Gemini Twin Spindle series is designed to handle high production volumes in a variety of different sizes. The twin spindle allows for a large reduction in the cost and cycle time per component and twice the productivity with a footprint only slightly larger than a single spindle machine.
Table Size | 55.1" x 20.5" (1,400 mm x 520 mm) |
X-Axis Travel | 29.5" (750 mm) |
Y-Axis Travel | 19.6" (500 mm) |
Z-Axis Travel | 23.6" (600 mm) |
Maximum Table Load | 2,200 Ibs (1,000 kg) |
Spindle Drive Motor | 20 HP (opt. 35 HP) |
Spindle Taper | CAT 50 |
Spindle Speed | 4,000 RPM |
CNC Controller | Fanuc 0iMF |
Standard Floor Space | 118.2 x 165.4" (3,000 mm x 4,200 mm) |
Table Size | 55.1" x 20.5" (1,400 mm x 520 mm) |
X-Axis Travel | 29.5" (750 mm) |
Y-Axis Travel | 19.6" (500 mm) |
Z-Axis Travel | 23.6" (600 mm) |
Maximum Table Load | 2,205 Ibs (1,000 kg) |
Spindle Drive Motor | 20 HP (opt. 35 HP) |
Spindle Taper | CAT 50 |
Spindle Speed | 4,000 RPM |
CNC Controller | Fanuc 0iMF |
Standard Floor Space | 118.2 x 165.4" (3,000 mm x 4,200 mm) |
Specifications are subject to change without notice.
BLOG
Twin Spindle Machining Centers Deserve a Second Look
Compared to the typical 40" x 20" (1,016 mm x 508 mm) single-spindle machining center you can find in any job shop, twin spindles are purchased with one thing in mind: maximum spindle utilization. For that, you want either a pallet changer or robotic part handling...
Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM
Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD
Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD
Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM
Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive
Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive
Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)
X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)
The DTC machines are designed for drill tap applications and full milling capabilities.
View ModelsHigh speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.
View Models