Toyoda | Gemini XL
English Deutsch Portuguese

Vertical Machining Centers

High speed, high performance, and high load capacities to lower your cost per part.

Gemini XL

The Gemini Twin Spindle Series is designed to handle high production volumes in a variety of different sizes. Available with spindle center line distances from 250 mm up to 550 mm and spindle taper configurations from 30 taper all the way up to 50 taper with the Gemini MAX. Large reduction in the cost per component due to reduction in Cycle time per component. Two times the productivity within a footprint only slightly larger than that of a single spindle machine. Reduction man power requirement, resources maintenance cost and power consumption.

Toyoda Advantage ROI Justification MACHINE SELECTOR

FERROUS SPECS

Table Size 47.24" x 18.9" (1,200 mm x 480 mm)
X-Axis Travel 23.6" (600 mm)
Y-Axis Travel 17.7" (450 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,760 lbs (800 kg)
Spindle Drive Motor 20 HP
Spindle Taper CAT 40
Spindle Speed 8,000 RPM
CNC Controller Fanuc 0iMF
Standard Floor Space 90.5 x 141.7" (2,300 mm x 3,600 mm)

NON-FERROUS SPECS

Table Size 47.24" x 18.9" (1,200 mm x 480 mm)
X-Axis Travel 23.6" (600 mm)
Y-Axis Travel 17.7" (450 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,760 lbs (800 kg)
Spindle Drive Motor 20 HP
Spindle Taper CAT 40
Spindle Speed 8,000 RPM
CNC Controller Fanuc 0iMF
Standard Floor Space 90.5 x 141.7" (2,300 mm x 3,600 mm)

HIGH TEMP ALLOY SPECS

ACCURACY

REEQUIREMENTS

Table Size 47.24" x 18.9" (1,200 mm x 480 mm)
X-Axis Travel 23.6" (600 mm)
Y-Axis Travel 17.7" (450 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,760 lbs (800 kg)
Spindle Drive Motor 20 HP
Spindle Taper CAT 40
Spindle Speed 8,000 RPM
CNC Controller Fanuc 0iMF
Standard Floor Space 90.5 x 141.7" (2,300 mm x 3,600 mm)
Table Size 47.24" x 18.9" (1,200 mm x 480 mm)
X-Axis Travel 23.6" (600 mm)
Y-Axis Travel 17.7" (450 mm)
Z-Axis Travel 23.6" (600 mm)
Maximum Table Load 1,760 lbs (800 kg)
Spindle Drive Motor 20 HP
Spindle Taper CAT 40
Spindle Speed 8,000 RPM
CNC Controller Fanuc 0iMF
Standard Floor Space 90.5 x 141.7" (2,300 mm x 3,600 mm)

Specifications are subject to change without notice.

BLOG

Twin Spindle Machining Centers Deserve a Second Look
Compared to the typical 40" x 20" (1,016 mm x 508 mm) single-spindle machining center you can find in any job shop, twin spindles are purchased with one thing in mind: maximum spindle utilization. For that, you want either a pallet changer or robotic part handling...

Full Line of Vertical Machining Centers

Five-Axis

Full Five-Axis Vertical Machining Centers
Trunnion or Articulating Head

View Models

Five-Axis

UA2090Ti
78.7" (X) x 35.4" (Y) x 27.5" (Z)

FV-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900mm) to 59.1" (1.500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

FV-65 Series

FV965
35.4" (X) x 25.6" (Y) x 23.6" (Z)

FV1165
43.3" (X) x 25.6" (Y) x 23.6" (Z)

FV1365
51.2" (X) x 25.6" (Y) x 23.6" (Z)

FV1565
59.1" (X) 25.6" (Y) x 23.6" (Z)

FV-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400mm) to 63" (1,600mm)
Y-Axis: 31.5" (800mm)
Z-Axis: 27.6" (700mm) to 31.5" (800mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-80 Series

FV1480
55.1" (X) x 31.5" (Y) x 27.6" (Z)

FV1680
63" (X) x 31.5" (Y) x 31.5" (Z)

FV-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000mm)
Y-Axis: 35.4" (900mm)
Z-Axis: 35.4" (900mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

FV-90 Series

FV2090
78.7" (X) x 35.4" (Y) x 35.4" (Z)

STEALTH-65 Series

Job Shop #40/#50 Taper Boxway
X-Axis: 35.4" (900mm) to 59.1" (1,500mm)
Y-Axis: 25.6" (650mm)
Z-Axis: 23.6" (600mm)
Spindle: 6,000 RPM, 8,000 RPM, or 12,000 RPM

View Models

STEALTH-65 Series

Stealth 965
35.4" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1165
43.3" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1365
51.2" (X) x 25.6" (Y) x 23.6" (Z)

Stealth 1565
59.1" (X) x 25.6" (Y) x 23.6" (Z)

FV-S Die/Mold

Production #40 Highspeed Linear Way
X-Axis: 40.2" (1,020 mm) to 47.2" (1,200 mm)
Y-Axis: 20.1" (510 mm) to 25.6" (650 mm)
Z-Axis: 20.1" (510 mm) to 24.0" (610 mm)
Spindle: 12,000 RPM Direct Drive

View Models

FV-S Die/Mold

FV1050S
40.2" (X) x 20.1" (Y) x 20.1" (Z)

FV1265S
47.2" (X) x 25.6" (Y) x 24.0" (Z)

AQ Series

Production #40 Highspeed Linear Way
X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

AQ Series

AQ850
31.5" (X) x 20.1" (Y) x 20.1" (Z)

AQ1050
40.2" (X) x 20.1" (Y) x 20.1" (Z)

AQ1265
47.2" (X) x 25.6" (Y) x 24" (Z)

AQ1465
55.1" (X) x 25.6" (Y) x 24" (Z)

AQ1665
63" (X) x 25.6" (Y) x 24" (Z)

High Speed Production Line

Max X-axis Travel: 23.62"(600mm)
Max Y-axis Travel: 19.69" (500 mm)
Max Z-axis Travel: 15.75" (400 mm)

View Models

High Speed Production Line

e640V
23.6" (X) x 19.69" (Y) x 15.75" (Z)

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)

View Models

Integral Pallet Changing Machines

MCV 450XL
High speed and high performance vertical machining center.

Twin Spindle

Twin Spindle Vertical Machining Center

View Models

Twin Spindle

Gemini Max
29.5" (X) x 19.6" (Y) x 23.6" (Z)

Gemini XL
23.6" (X) x 17.7" (Y) x 23.6" (Z)

Gemini XL Jr.
19.7" (X) x 17.7" (Y) x 23.6" (Z)

Gemini Mini
23.6" (X) x 15.7" (Y) x 18.8" (Z)

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models

Drill Tap Centers

DTC-400XL
16.7" (X) x 15.75" (Y) x 12.6" (Z)

DTC-400XL-L
27.5” (X) x 15.7” (Y) x 12.6” (Z)

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models

PCB Drilling Machines

UB-6022D-20
Under the most critical demand for accuracy, efficiency, and drilling on micro holes or thin boards, the needed performance can be easily found on Takisawa's ASTRON UB-6022D-20.