JTEKT Toyoda Americas Expands their Line of High-…
ARLINGTON HEIGHTS, IL (February 10, 2020) – JTEKT Toyoda Americas Corporation and Ace Micromatic Group have formed a strategic alliance to …
ARLINGTON HEIGHTS, Illinois (August 2, 2019) – Performance, capability and speed are on full display when you stop by Toyoda’s Booth no. 2276 at the CMTS 2019 show in Toronto, Ontario. JTEKT Toyoda Americas Corporation will showcase the FH500J highly rigid and reliable horizontal machining center and Takisawa Taiwan Stealth EX-108 high-speed horizontal turning center.
The FH500J is a compact, high-speed machine featuring a 15,000 RPM, 50HP (37kW), 303 Nm (223 ft-lb) direct drive spindle and rapid feedrates of 2,362 ipm (60 m/min). Its patented hydraulic preload system brings your spindle up to 10,000 RPM in less than 1 second – without spindle warm up. The speed of the FH500J machine is represented not just in the spindle, it is equipped with a direct drive B-axis table featuring an index time (90 degrees) of 0.5 seconds. All supporting mechanisms, such as ball screws, motors, and guideways have been designed to operate at higher feeds and speeds for millions of cycles – allowing job shops to take advantage of more aggressive machining for mass production.
Toyoda is also pleased to introduce its exclusive Takisawa Taiwan horizontal turning center in Canada, the Stealth-EX108. This linear guide way turning center offers a 4,000 RPM 20 HP spindle, an 8” chuck size, and a special one piece thermally balanced bed designed with a 30-degree slant – all built with high-speed production in mind.
Witness these machines in action at Toyoda’s booth, or visit www.toyoda.com for more information about these showcased machines.
For show information, visit: https://www.toyoda.com/news-events/cmts2019
About JTEKT Toyoda Americas Corporation
For more than 40 years, JTEKT Toyoda Americas Corporation has provided an extensive line of CNC machines engineered for innovators and built with the speed, strength and capacity to get the job done. Toyoda’s premier lineup includes horizontal and vertical machining centers, bridge and gantry-type mills, turning centers, grinding machines and automation solutions. From job shop applications to high-volume production, thoughtful engineering has been the cornerstone of Toyoda machine tools. Built to be ruggedly tough in high-production environments, Toyoda sparks innovation and efficiency for the technology of tomorrow. www.toyoda.com