• The FH630SX is a powerful, high-speed horizontal machining center featuring an 8,000 RPM high-torque spindle, with an option of a 15,000 RPM spindle, and a rapid feedrate of 2,362 ipm (60 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity.


    Pallet Size 24.8" x 24.8" (630 mm x 630 mm)
    Table Index Full NC table (360,000 positions)
    X-axis Travel (column) 39.37” (1,000 mm)
    Y-axis Travel (spindle head) 31.50” (800 mm)
    Z-axis Travel (work table) 33.46” (850 mm)
    Maximum Work Load on the Pallet 2,640 lb (1,200 kg)
    Spindle Drive Motor  50 HP (37 kW) for 30 min. / 40 HP (30 kW) cont.
    Spindle Output Torque 744 ft-lb (1,009 Nm)
    Spindle Taper CAT50
    Spindle Speed 8,000 RPM
    Spindle Type Direct drive
    Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121, 200 Optional)
    Standard Floor Space 297" x 141" x 126" (7,543 mm x 3,576 mm x 3,180 mm)
    Standard Net Weight 39,600 lb (18,000 kg)





    Linear Position Accuracy ± .00012" (.003 mm) full stroke
    Linear Repeatability ± .00008" (.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability  ± 3.5 arc seconds



    Hydraulic Oil Mobil DTE Oil Light (14 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (9.3 gal)
    Table Lubrication               Mobil Gear 600 XP 150 (.79 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V - Transformer Not Included) 52 kVA



FH630SX Horizontal Machining Center with TIPROS FMS

Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Laying Low

Toyoda’s column is a unique design that has a low center of gravity. This increased stability assists in providing rigid and precise machining.

Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.

Share This:
  • Twitter
  • Facebook
  • LinkedIn
  • E-mail
  • StumbleUpon

Difficulty seeing the panoramic? Try viewing it in its own window here.

Solidly Constructed

Utilizing JTEKT’s proprietary FCD 600 cast iron technology for the base and column, the solid, high-grade Meehanite cast iron base has three-point support.

Prev | Next


Cutting Rigidity

The dual ballscrews in the Y and Z axes increase machining stability during heavy-duty cutting.

Prev | Next


Spindle Taper:

ATC (Tool Capacity):

Spindle Speed:


I'm also interested in:


♦♦♦ Are required fields